The stainless steel has the many kinds of face work opened up itsapplication domain -- different face work to cause the stainless steelsurface respectively differently, caused it in the application eachoriginality.Cold Rolled Steel Strip.e.g.
In construction application domain, stainless steel face worktherefore important has many reasons.
The corrosion environment request smooth surface is becausesuperficial smooth not easy accumulated dirt. The dirt deposition cancause the stainless steel to rust even creates the corrosion.
In the spacious hall, the stainless steel is the elevator dalle mostcommonly used material, the superficial hand imprint although may wipeoff, but affects artisticly, therefore best selects the appropriatesurface to prevent leaves behind the hand imprint.
The hygienic condition to many professions is very important, forexample, the food processing, the dining, brew with the chemicalindustry and so on, in these application domains, the surface must beadvantageous for cleans every day, moreover frequently must usechemistry cleansing agent.
The stainless steel is this aspect best material, in the public place,the stainless steel surface frequently can by Hu Xieluan the picture,but, its important characteristic is may clear wash off them, this isthe stainless steel surpasses the aluminum a remarkablecharacteristic. The aluminum surface is easy to leave behind thetrace, very is often difficult to remove. Cleans up when the stainlesssteel surface should be suitable the stainless steel trace cleaningup, because some face work trace is unidirectional.
The stainless steel most is suitable for the hospital or otherhygienic condition very important domains, for example: The foodprocessing, the dining, brew with the chemical industry, this not onlyis because it is advantageous for cleans every day, sometimes alsomust use chemistry cleansing agent, moreover because it is not easy tomultiply the bacterium. The experiment indicated the stainless steelis same in this aspect performance and the glass and the ceramics.
1. stainless steel natural outward appearances
The stainless steel for the person one kind of natural firm feeling, its natural color gently reflects the environmentcolor.
2. face works basic type
May use in the stainless steel face work approximately to havefive kinds, they may unify the use, transforms more final products.
Five types include: Rolling face work, mechanical face work, chemistryface work, net grain face work and colored face work.
Also has some special-purpose face works, but which one kind of facework regardless of assigns below, all should follow the step:
(1) with the manufacturer decided together needs the face work, bestprepares a sample, will take the next volume production the standard.
When (2) big area use (for example the compound board, must guaranteeuses the basis volume board or the volume material use is theidentical raid.
(3) in many constructions applications, for example: In elevator,although the hand imprint may wipe off, but is not very artistic. Ifselects the woven surface, not that was obvious. Certainly cannot usethe mirror surface stainless steel in these sensitive places.
When (4) choice face work should consider the manufacture craft, forexample: For except the bead, possibly must carry on to the weldedjoint resharpens, moreover also must restore the original face work.
The pattern board very difficult to be even unable to satisfy thisrequest.
(5) regarding some face work, resharpens the trace which or polishesis in the right way tropism, is called unidirectionally. If uses timecauses this kind of trace vertically but is not the level,contamination not Yi Fuzhuo in above, moreover is easy to clean.
(6) which kind of precision work regardless of uses all to need toincrease the craft step, therefore must increase the expense,therefore, time choice face work must be prudent.
Therefore, the architect, designs the personnel and the manufacturerand so on the concerned personnel needs to have the understanding tothe stainless steel face work. And mutually exchanges through eachother between friendship and cooperation, certainly can obtain theeffect which expected.
(7) according to us the experience, we did not suggest the usealuminum oxide makes the grinding compound, only if is extremelycareful in the use process. Should better uses the silicon carbidegrinding compound.
3. standard face works
Many kind of face works always are use the serial number orother classified methods expressed, they have been all enrolled in therelated standard, for example: " English standard BS1449"With " American steel and iron association stainless steelproducer committee standard " .
4. rolling face work
The plate and the strip have three kind of basic rolling facework, they are through the plate and the belt village production craftexpression.
No.1: After hot rolling, acid pickling and scale removal.After the processing steel plate surface is one kind of dim surface,is a little rough.
No.2D: Compared to N0.1 face work, also is the dim surface. After thecold rolling, the scale removal, finally uses the hair sideroller lightly to roll over.
No.2B: This is constructs in the application most commonly used,besides with polishes the roller after and the scale removal tocarry on last the mild cold rolling, other crafts and 2D are same, thesurface slightly somewhat shines, may carry on polishes processing.
No.2B : This is one kind of reflective surface, theprocess polishes the roller rolling and carries on in the controllableatmosphere finally still maintained itsreflection surface, moreover did not produce the oxide skin.
Because in the process does not have the oxidizingreaction, therefore, does not need again to carry on the acid picklingand deactivated processing.
In construction application domain, stainless steel face worktherefore important has many reasons.
The corrosion environment request smooth surface is becausesuperficial smooth not easy accumulated dirt. The dirt deposition cancause the stainless steel to rust even creates the corrosion.
In the spacious hall, the stainless steel is the elevator dalle mostcommonly used material, the superficial hand imprint although may wipeoff, but affects artisticly, therefore best selects the appropriatesurface to prevent leaves behind the hand imprint.
The hygienic condition to many professions is very important, forexample, the food processing, the dining, brew with the chemicalindustry and so on, in these application domains, the surface must beadvantageous for cleans every day, moreover frequently must usechemistry cleansing agent.
The stainless steel is this aspect best material, in the public place,the stainless steel surface frequently can by Hu Xieluan the picture,but, its important characteristic is may clear wash off them, this isthe stainless steel surpasses the aluminum a remarkablecharacteristic. The aluminum surface is easy to leave behind thetrace, very is often difficult to remove. Cleans up when the stainlesssteel surface should be suitable the stainless steel trace cleaningup, because some face work trace is unidirectional.
The stainless steel most is suitable for the hospital or otherhygienic condition very important domains, for example: The foodprocessing, the dining, brew with the chemical industry, this not onlyis because it is advantageous for cleans every day, sometimes alsomust use chemistry cleansing agent, moreover because it is not easy tomultiply the bacterium. The experiment indicated the stainless steelis same in this aspect performance and the glass and the ceramics.
1. stainless steel natural outward appearances
The stainless steel for the person one kind of natural firm feeling, its natural color gently reflects the environmentcolor.
2. face works basic type
May use in the stainless steel face work approximately to havefive kinds, they may unify the use, transforms more final products.
Five types include: Rolling face work, mechanical face work, chemistryface work, net grain face work and colored face work.
Also has some special-purpose face works, but which one kind of facework regardless of assigns below, all should follow the step:
(1) with the manufacturer decided together needs the face work, bestprepares a sample, will take the next volume production the standard.
When (2) big area use (for example the compound board, must guaranteeuses the basis volume board or the volume material use is theidentical raid.
(3) in many constructions applications, for example: In elevator,although the hand imprint may wipe off, but is not very artistic. Ifselects the woven surface, not that was obvious. Certainly cannot usethe mirror surface stainless steel in these sensitive places.
When (4) choice face work should consider the manufacture craft, forexample: For except the bead, possibly must carry on to the weldedjoint resharpens, moreover also must restore the original face work.
The pattern board very difficult to be even unable to satisfy thisrequest.
(5) regarding some face work, resharpens the trace which or polishesis in the right way tropism, is called unidirectionally. If uses timecauses this kind of trace vertically but is not the level,contamination not Yi Fuzhuo in above, moreover is easy to clean.
(6) which kind of precision work regardless of uses all to need toincrease the craft step, therefore must increase the expense,therefore, time choice face work must be prudent.
Therefore, the architect, designs the personnel and the manufacturerand so on the concerned personnel needs to have the understanding tothe stainless steel face work. And mutually exchanges through eachother between friendship and cooperation, certainly can obtain theeffect which expected.
(7) according to us the experience, we did not suggest the usealuminum oxide makes the grinding compound, only if is extremelycareful in the use process. Should better uses the silicon carbidegrinding compound.
3. standard face works
Many kind of face works always are use the serial number orother classified methods expressed, they have been all enrolled in therelated standard, for example: " English standard BS1449"With " American steel and iron association stainless steelproducer committee standard " .
4. rolling face work
The plate and the strip have three kind of basic rolling facework, they are through the plate and the belt village production craftexpression.
No.1: After hot rolling, acid pickling and scale removal.After the processing steel plate surface is one kind of dim surface,is a little rough.
No.2D: Compared to N0.1 face work, also is the dim surface. After thecold rolling, the scale removal, finally uses the hair sideroller lightly to roll over.
No.2B: This is constructs in the application most commonly used,besides with polishes the roller after and the scale removal tocarry on last the mild cold rolling, other crafts and 2D are same, thesurface slightly somewhat shines, may carry on polishes processing.
No.2B : This is one kind of reflective surface, theprocess polishes the roller rolling and carries on in the controllableatmosphere finally still maintained itsreflection surface, moreover did not produce the oxide skin.
Because in the process does not have the oxidizingreaction, therefore, does not need again to carry on the acid picklingand deactivated processing.
